World Food Equipment logo, walk-in coolers and freezers, Ontario
Commercial walk-in cooler with a row of black-framed glass-door reach-in display merchandisers built into the front face, white insulated panel construction with brushed aluminum diamond-plate corner trim and kick plates, a solid swing access door alongside, glass-door reach-in cooler installation by World Food Equipment in Ontario

Service / Reach-In Refrigeration

Commercial reach-in coolers & freezers, supplied and installed across Ontario.

Commercial reach-in coolers and reach-in freezers, supplied and installed across Ontario. WFE builds the refrigerated display for gas stations, convenience stores, grocery, and retail: glass-door merchandiser runs, walk-in cold rooms fronted with reach-in doors, and open multi-deck cases. We also place reach-ins as part of a restaurant walk-in build. The same in-house crew installs and sizes them to your store and delivery cadence, not as single units off a catalog.

Get my free quote See the full lineup Need a walk-in instead? →
Scope

We fit out stores with display refrigeration as full projects. New reach-ins go in as part of a build; refurbished used merchandisers and display cases sell one at a time from our for-sale catalog.

30+
Years
Installing reach-in and display refrigeration across Ontario
4
Retail Verticals
Gas stations, convenience stores, grocery, and retail
24h
Quote Turn
Spec'd, priced, and back on your desk in one business day

The Lineup

Three display formats,
one cold corner.

Reach-in display isn't one product, it's a system. The right format depends on your floor space, your foot traffic, and how many doors get pulled per shift. Here's how we spec it for gas stations, convenience stores, grocery, and retail.

How it goes together

One cold corner, one refrigeration plant.

A typical convenience-store or grocery build: a back-of-house walk-in cold room with its front wall built as a run of glass reach-in merchandiser doors, plus open multi-deck cases on the floor. We size the door count, the case run, and the refrigeration to your store.

DWG WFE-RI-01 · interior elevation, not to scale · click to zoom

/01

Glass-Door Merchandisers

The glass-door wall, cooler or freezer.

The wall of glass doors a customer pulls open for a drink or a carton of milk. We build the run in commercial reach-in cooler doors at +2°C and reach-in freezer doors at -18°C, mixed in one lineup so cold and frozen sit side by side. Aluminum frames, low-E anti-sweat glass, LED-lit shelves, sized to your door count.

This is commercial refrigerator display: the glass door fridge and freezer wall a gas station, convenience store, or grocery runs out front, stocked with beverages, dairy, frozen, and grab-and-go. Operators call it a commercial fridge, a glass door refrigerator, or a merchandiser; the spec is the same. We size the door count and the cooler-to-freezer split to your product mix and your traffic.

Doors
Multi-door runs
Temp
+2°C cooler / -18°C freezer
Glass
Low-E, anti-sweat, LED
Envelope
4″ Norbec / Kingspan
Staff door
Coldmatic + Kason
Front
Glass reach-in doors

Walk-In, Reach-In Front

Back-stock behind, sales floor in front.

The most common build we do for a busy store: a walk-in cooler at the back, its sales-floor wall built as a run of glass reach-in doors. Staff load it from inside the cold room; customers pull product from the front. One cold room handles back-stock and display at once.

The cold room itself is a walk-in: 4-inch Norbec and Kingspan panels rated R-27 to R-36, a Coldmatic insulated staff door with Kason hardware and a magnetic gasket, and a floor matched to the traffic. Step up to 6-inch panels and a heated glycol floor when the run is freezer doors. It all runs off a remote condensing rack, so the compressor noise and heat stay off the sales floor.

/02
/03

Open Multi-Deck Cases

Grab-and-go, no door to open.

Open-front multi-deck cases for the product that sells on impulse: produce, dairy, packaged deli, cold drinks, and grab-and-go meals. No door means faster pulls at the busy end of the store, with night curtains drawn after close to hold temperature.

This is open commercial refrigerator display. We size the case run and the refrigeration to the aisle, whether it ties into the same remote rack as your glass-door wall or runs self-contained.

Format
Open-front, multi-deck
Temp
+2°C to +4°C
Product
Produce, dairy, grab-and-go

New Build or Replacement

Two starting points, one conversation.

Every case we install is new. Whether the store is a fresh build or a tired run due for a swap, we quote the whole project.

N

New Build

Spec to factory.

Every case is sourced new, direct from the major North American commercial-refrigeration manufacturers we work with. Factory warranty, current refrigerants, longest service life.

  • → Manufacturer warranty: 1-yr parts/labour, up to 5-yr compressor
  • → Current low-GWP refrigerants
  • → ENERGY STAR where applicable
  • → Custom finish and dimensions available
R

Replacement

Swap the run, keep selling.

Replacing tired cases in a working store is its own trade. We phase the swap so the cold wall keeps selling, and haul the old equipment out when the new run goes live.

  • → Phased install, one section at a time
  • → Old cases removed and hauled out
  • → Trade-in credit where the old equipment has value
  • → Good for a remodel, a rebrand, or a phased rollout
How trade-in credits work →

When to choose what

Reach-in or walk-in?
Here's the line.

Walk-in vs reach-in: most stores need both. The list below is where the math tips.

Reach-In

Choose when…

  • → Product needs to be seen and self-served
  • → Tight floor plan, no room for a back room
  • → A handful of doors covers the cold SKUs
  • → Convenience, gas-station, or small-format retail
  • → Fast pulls at the front of the store

Walk-In

Choose when…

  • → Bulk back-stock that refills the display
  • → Pallet-scale or case-lot storage
  • → Grocery, distribution, or multi-location
  • → A cold room behind the sales floor
  • → Volume has outgrown a row of doors

Most stores run both. See walk-in coolers & freezers →

Before you call us

The 7-question reach-in checklist.

Run through this before the quote call. Even if you can't answer all seven, knowing what you don't know tells us where to focus.

From the Field

Where WFE reach-ins live.

What this work looks like in the field: a finished glass-door merchandiser run for a store, the walk-in cold room that refills it from behind, and a restaurant build where reach-ins go in as a companion.

A long lineup of black-framed glass-door reach-in refrigerated merchandisers freshly installed along a wall, the run trimmed with brushed aluminum diamond plate, white interiors with chrome wire shelves behind the glass, in a commercial grocery and convenience-store space, glass-door display cooler installation by World Food Equipment, Ontario
Glass-Door Display

A finished run of glass-door reach-in merchandisers, the cold wall a convenience store or grocery customer pulls from. This is the work this page is about.

Interior of a stocked commercial walk-in cooler at Food Junction Toronto with wire shelving on the left holding bins of product, ceiling-mounted evaporator visible mid-room, stacks of branded product cases and bread tray racks on the right, polished concrete floor under fluorescent strip lighting, Food Junction install, Ontario, World Food Equipment
Back-Of-House Cold Room

A stocked walk-in cold room at Food Junction Toronto, the back-stock that refills a glass-door display from behind. Grocery and convenience builds pair the two.

Wide view of a commercial restaurant kitchen interior with a central stainless steel prep island, additional stainless prep tables and equipment along the left and right walls, bakery sheet-pan racks staged on both sides, a centered overhead exhaust hood, exit sign visible at the back-right, white insulated panel walls and ceiling, polished concrete floor with a centered drain trough, Ontario commercial restaurant kitchen by World Food Equipment
Restaurant Companion

Reach-in coolers and freezers also go in as part of a full restaurant build, sized to the line rather than sold as single units.

FAQ

Questions reach-in buyers ask first.

What is the difference between a reach-in cooler and a walk-in cooler?
A reach-in cooler is an upright cabinet you open from the front, typically 20 to 80 cubic feet, designed for high-turn product on the sales floor or prep line. A walk-in cooler is a room you physically walk into, typically 200 to 2,000+ cubic feet, designed for bulk back-of-house storage. Cost-per-cubic-foot favours walk-ins for any operation storing over 60 cubic feet of product. Most stores run both: reach-in display out front, a walk-in for back-stock.

Is the reach-in equipment WFE installs new or used?
Both. New commercial reach-in coolers and reach-in freezers come from our supplier network, specced into your store build or display run. We also keep a rotating stock of refurbished used glass-door merchandisers, deli cases, and multideck cases at the Mississauga warehouse, tested before sale with a 3-month warranty and listed in the for-sale catalog. Call (289) 813-5293 with your store, your door count, and your budget, and we will scope it.

What drives reach-in freezer cost compared to a reach-in cooler?
A reach-in freezer runs heavier in every spec category: thicker insulation, larger compressor, electric defrost cycle, and higher draw at the outlet. The premium over the equivalent reach-in cooler scales with door count, plant location (top-mount vs bottom-mount), and whether the unit is glass-door or solid. We quote both the cooler and freezer side-by-side so you can see exactly where the cost lands on your spec, not on a catalog page.

Top-mount or bottom-mount compressor — which is right for me?
Top-mount runs in cooler air, which makes the compressor last longer and run quieter. Best for hot rooms. Bottom-mount is easier to service and gives you more usable interior space at standing height. If the room runs hot or dusty, top-mount sits above floor-level dust. We spec it from your store ambient and service-access constraints.

How much reach-in capacity does a store actually need?
For a store, capacity is a door-count question: we size the glass-door run to your delivery cadence and your cold SKUs, so the cooler and freezer doors match what actually moves off the floor. For a restaurant, reach-in coolers and freezers go in alongside the walk-in build, sized to the prep line rather than sold as single units.

Can I buy a commercial fridge, undercounter freezer, or reach-in separately, or only with a walk-in?
New units, as part of a project: a glass-door run or open cases for a convenience store, grocery, gas station, or retailer, or commercial fridges, undercounter refrigerators, and undercounter freezers specified into a restaurant prep line alongside the walk-in build. Single used units, yes: the merchandisers and display cases in our for-sale catalog sell one at a time for pick-up in Mississauga. If you need one plug-in unit for a home, a local appliance dealer is the better call.

What kind of warranty comes with a new commercial reach-in?
Manufacturer warranties on new commercial reach-in refrigeration typically run 1 year parts and labour, 5 years on the compressor. Specific terms depend on the manufacturer and the unit, and we confirm them on the quote.

What's the lead time on a new reach-in?
Lead time depends on whether the unit is in supplier stock or on a new-build order. Standard configurations are typically faster than custom finishes or non-standard widths. We confirm the actual date when we quote. Supplier stock changes weekly.

Do you install reach-ins or only deliver them?
We install. A glass-door run, a walk-in fronted with reach-in doors, or open multi-deck cases all need the refrigeration tied in, leveled, and commissioned, and most run off a remote rack on 208V. A small plug-in unit can drop into a standard outlet, but the retail fitouts we do are a full install. We can deliver only if you have your own refrigeration contractor.

Where does WFE deliver commercial reach-in coolers and freezers?
Anywhere in Ontario from our Mississauga workshop or directly from supplier stock, always as part of a fitout or walk-in project. GTA-core delivery (Toronto, Mississauga, Brampton, Hamilton, Vaughan) is fastest. Northern Ontario including Sudbury is on a scheduled-delivery basis. We confirm the date on the quote.

Industries

Reach-in refrigeration for…

Service Areas

Reach-in delivery & install in…

Toronto Mississauga Brampton Hamilton Vaughan Markham Oakville Burlington Ajax-Pickering Sudbury

Not sure where to start?

Spec your reach-in lineup in 60 seconds.

Answer the form below; we'll spec the run and quote the full project back to you.

Start the quote (289) 813-5293

Free Quote — No Obligation

Get a Quote
Within One Business Day.

Tell us what you need. One of our senior project advisors will personally review your requirements and respond within one business day, with a ballpark number, not a runaround.

Free Site Assessment

We visit your location and measure. No assumptions, no surprises.

In-House Crews Only

Our long-tenured in-house team does the install. No third-party subcontractors.

Custom-Designed to Your Floor Plan

Every unit engineered to your exact dimensions, not pulled from a catalog.

Prefer to talk? Call us directly:

(289) 813-5293

Tell us about your project

We respond within one business day. No spam, no sales pressure.

Call Now Free Quote